24
мар
Vcds Lite 12 Rus
Posted:adminVcds Lite 12 Rus Rating: 3,5/5 9095 votes
Loading VCDS-Lite VCDS-Lite for all 3rd party and 'Dumb' Interfaces VCDS-Lite is Copyright 2012 by Ross-Tech LLC / Uwe M. All rights are reserved. De-compilation, disassembly, reverse-engineering, alteration, use as a reference tool for the purpose of developing a product with similar functionality, and re-distribution in any form without the prior written consent of the author is prohibited. The unregistered shareware version of VCDS-Lite is free for non-commercial use, but no support of any kind is available. Use in a commercial environment requires registration. By downloading this software, you acknowledge that this Program is provided 'as is' and 'with all faults, defects and errors' and that all use of the Program is at your own full risk.
If you're not ready for an interface upgrade, you'll have to use VCDS-Lite instead. The default installation folder is C: Ross-Tech VCDS It is essential NOT to install in the Program Files tree in on systems running Windows Vista or newer.
It has been extensively tested, but we cannot guarantee it will work correctly with every system in every car. We will make our best effort to fix any bugs and to enhance the program, but we specifically disclaim any liability for damage to your computer or your car, and we do not promise to have any particular enhancements available on any specific date.
Instructions: • If you have a HEX, KEY, KII, or Micro-CAN interface, you're on the wrong page. • Download the self-installing distribution file. • Run it and follow the prompts to allow it to install itself. • You must install VCDS-Lite on your PC's hard disk! It will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access.
• Connect an appropriate interface between the computer and the car. Ross-Tech does not supply interfaces for VCDS-Lite. VCDS-Lite works with some of our old interfaces from many years ago, as well as many 3rd-party interfaces. • Turn the car's ignition switch ON. No need to start the engine. • Start the VCDS-Lite program: • Click [ Options] and select the correct communicationsport.
• Use [ Test] to confirm that the program can use the port and find the interface. • Then [ Save]. Make sure the software can reliably access all the control modules that it should in your car.
Read Fault Codes from some modules. • In order to get access to some of the more advanced functions, will need to the software. The exact differences in functionality between the unregistered/shareware and registered/activated versions are summarized in. Note to registered users updating from older versions: • If you're updating from VCDS-Lite version 1.0 or 1.1 you should not need a new activation. Simply install VCDS-Lite in the same location and it should use your existing activation. • If you're upgrading from an older version such as VAG-COM version 311 or 409, you will need a new activation.
• First, install the VCDS-Lite and test it thoroughly in shareware mode as described above. • Then - Release Notes: • VCDS-Lite works with most 3rd-party 'Dumb K-Line' interfaces as well as the following ancient low-tech Ross-Tech Interfaces, the last of which we sold early in 2004:,,,,,. • VCDS-Lite works with all standard versions of Windows, from Windows 95 though Window 10. Both 32-bit and 64-bit Windows builds work fine, but if you're using a 3rd-Party USB interface, keep in mind that it is your interface supplier's responsibility to provide a driver for his hardware. • VCDS-Lite does NOT work on Windows RT Windows RT runs on devices with ARM (instead of x86) CPUs and normal Windows programs like VCDS-Lite simply do not work on them. • The default installation folder is C: Ross-Tech VCDS-Lite If allowed to install in the default location, it should not interfere with an existing Ross-Tech software on your PC.
Chinese media called the ship 'carrier killer'. Design [ ] Command and control [ ] The ship's combat systems can use target designation data from the ship's active and passive sensors, from other ships in the fleet, from surveillance aircraft or via a communications link from the ship's helicopter. A third version, Project 956EM, later developed for the was the latest development of this class. The main difference between the two is that the missile launching tubes on Project 956A are longer than that of Project 956 to accommodate the increased size of the newer missile, and these launching tubes can be used to fire / store the original 3M80 as well. Blank uborki pomescheniya.
Popular Posts
Loading VCDS-Lite VCDS-Lite for all 3rd party and 'Dumb' Interfaces VCDS-Lite is Copyright 2012 by Ross-Tech LLC / Uwe M. All rights are reserved. De-compilation, disassembly, reverse-engineering, alteration, use as a reference tool for the purpose of developing a product with similar functionality, and re-distribution in any form without the prior written consent of the author is prohibited. The unregistered shareware version of VCDS-Lite is free for non-commercial use, but no support of any kind is available. Use in a commercial environment requires registration. By downloading this software, you acknowledge that this Program is provided 'as is' and 'with all faults, defects and errors' and that all use of the Program is at your own full risk.
If you're not ready for an interface upgrade, you'll have to use VCDS-Lite instead. The default installation folder is C: Ross-Tech VCDS It is essential NOT to install in the Program Files tree in on systems running Windows Vista or newer.
It has been extensively tested, but we cannot guarantee it will work correctly with every system in every car. We will make our best effort to fix any bugs and to enhance the program, but we specifically disclaim any liability for damage to your computer or your car, and we do not promise to have any particular enhancements available on any specific date.
Instructions: • If you have a HEX, KEY, KII, or Micro-CAN interface, you're on the wrong page. • Download the self-installing distribution file. • Run it and follow the prompts to allow it to install itself. • You must install VCDS-Lite on your PC's hard disk! It will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access.
• Connect an appropriate interface between the computer and the car. Ross-Tech does not supply interfaces for VCDS-Lite. VCDS-Lite works with some of our old interfaces from many years ago, as well as many 3rd-party interfaces. • Turn the car's ignition switch ON. No need to start the engine. • Start the VCDS-Lite program: • Click [ Options] and select the correct communicationsport.
• Use [ Test] to confirm that the program can use the port and find the interface. • Then [ Save]. Make sure the software can reliably access all the control modules that it should in your car.
Read Fault Codes from some modules. • In order to get access to some of the more advanced functions, will need to the software. The exact differences in functionality between the unregistered/shareware and registered/activated versions are summarized in. Note to registered users updating from older versions: • If you're updating from VCDS-Lite version 1.0 or 1.1 you should not need a new activation. Simply install VCDS-Lite in the same location and it should use your existing activation. • If you're upgrading from an older version such as VAG-COM version 311 or 409, you will need a new activation.
• First, install the VCDS-Lite and test it thoroughly in shareware mode as described above. • Then - Release Notes: • VCDS-Lite works with most 3rd-party 'Dumb K-Line' interfaces as well as the following ancient low-tech Ross-Tech Interfaces, the last of which we sold early in 2004:,,,,,. • VCDS-Lite works with all standard versions of Windows, from Windows 95 though Window 10. Both 32-bit and 64-bit Windows builds work fine, but if you're using a 3rd-Party USB interface, keep in mind that it is your interface supplier's responsibility to provide a driver for his hardware. • VCDS-Lite does NOT work on Windows RT Windows RT runs on devices with ARM (instead of x86) CPUs and normal Windows programs like VCDS-Lite simply do not work on them. • The default installation folder is C: Ross-Tech VCDS-Lite If allowed to install in the default location, it should not interfere with an existing Ross-Tech software on your PC.
Chinese media called the ship 'carrier killer'. Design [ ] Command and control [ ] The ship's combat systems can use target designation data from the ship's active and passive sensors, from other ships in the fleet, from surveillance aircraft or via a communications link from the ship's helicopter. A third version, Project 956EM, later developed for the was the latest development of this class. The main difference between the two is that the missile launching tubes on Project 956A are longer than that of Project 956 to accommodate the increased size of the newer missile, and these launching tubes can be used to fire / store the original 3M80 as well. Blank uborki pomescheniya.
...">Vcds Lite 12 Rus(24.03.2019)Loading VCDS-Lite VCDS-Lite for all 3rd party and 'Dumb' Interfaces VCDS-Lite is Copyright 2012 by Ross-Tech LLC / Uwe M. All rights are reserved. De-compilation, disassembly, reverse-engineering, alteration, use as a reference tool for the purpose of developing a product with similar functionality, and re-distribution in any form without the prior written consent of the author is prohibited. The unregistered shareware version of VCDS-Lite is free for non-commercial use, but no support of any kind is available. Use in a commercial environment requires registration. By downloading this software, you acknowledge that this Program is provided 'as is' and 'with all faults, defects and errors' and that all use of the Program is at your own full risk.
If you're not ready for an interface upgrade, you'll have to use VCDS-Lite instead. The default installation folder is C: Ross-Tech VCDS It is essential NOT to install in the Program Files tree in on systems running Windows Vista or newer.
It has been extensively tested, but we cannot guarantee it will work correctly with every system in every car. We will make our best effort to fix any bugs and to enhance the program, but we specifically disclaim any liability for damage to your computer or your car, and we do not promise to have any particular enhancements available on any specific date.
Instructions: • If you have a HEX, KEY, KII, or Micro-CAN interface, you're on the wrong page. • Download the self-installing distribution file. • Run it and follow the prompts to allow it to install itself. • You must install VCDS-Lite on your PC's hard disk! It will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access.
• Connect an appropriate interface between the computer and the car. Ross-Tech does not supply interfaces for VCDS-Lite. VCDS-Lite works with some of our old interfaces from many years ago, as well as many 3rd-party interfaces. • Turn the car's ignition switch ON. No need to start the engine. • Start the VCDS-Lite program: • Click [ Options] and select the correct communicationsport.
• Use [ Test] to confirm that the program can use the port and find the interface. • Then [ Save]. Make sure the software can reliably access all the control modules that it should in your car.
Read Fault Codes from some modules. • In order to get access to some of the more advanced functions, will need to the software. The exact differences in functionality between the unregistered/shareware and registered/activated versions are summarized in. Note to registered users updating from older versions: • If you're updating from VCDS-Lite version 1.0 or 1.1 you should not need a new activation. Simply install VCDS-Lite in the same location and it should use your existing activation. • If you're upgrading from an older version such as VAG-COM version 311 or 409, you will need a new activation.
• First, install the VCDS-Lite and test it thoroughly in shareware mode as described above. • Then - Release Notes: • VCDS-Lite works with most 3rd-party 'Dumb K-Line' interfaces as well as the following ancient low-tech Ross-Tech Interfaces, the last of which we sold early in 2004:,,,,,. • VCDS-Lite works with all standard versions of Windows, from Windows 95 though Window 10. Both 32-bit and 64-bit Windows builds work fine, but if you're using a 3rd-Party USB interface, keep in mind that it is your interface supplier's responsibility to provide a driver for his hardware. • VCDS-Lite does NOT work on Windows RT Windows RT runs on devices with ARM (instead of x86) CPUs and normal Windows programs like VCDS-Lite simply do not work on them. • The default installation folder is C: Ross-Tech VCDS-Lite If allowed to install in the default location, it should not interfere with an existing Ross-Tech software on your PC.
Chinese media called the ship 'carrier killer'. Design [ ] Command and control [ ] The ship's combat systems can use target designation data from the ship's active and passive sensors, from other ships in the fleet, from surveillance aircraft or via a communications link from the ship's helicopter. A third version, Project 956EM, later developed for the was the latest development of this class. The main difference between the two is that the missile launching tubes on Project 956A are longer than that of Project 956 to accommodate the increased size of the newer missile, and these launching tubes can be used to fire / store the original 3M80 as well. Blank uborki pomescheniya.
...">Vcds Lite 12 Rus(24.03.2019)© 2019 Vcds Lite 12 Rus.